Deutsch
Español
Français
TX-BCT boom mounted mulcher for skid steer loader
The TX-BCT boom mounted mulcher for skid steer loader is specially designed to shred pruned branches, small trees and debris from tree-felling and scrub clearance.
Features:
Robustness
Innovation
Flexibility
Durability
TX-BCT boom mounted mulcher for skid steer loader description:
The TX-BCT boom mounted mulcher for skid steer loader is specially designed to shred pruned branches, small trees and debris from tree-felling and scrub clearance. Its design enables it to be mounted onto any model of skid steer loader and comes with a hydraulic motor that depends on the litres of oilflow and pressure of each machine. It is equipped with a rotor with 125mm diameter hammers. The special positioning of the hammers on the rotor produces very fine shredding and the shredded material is evenly spread over the terrain. Skid runners for height adjustment. Very solid and sturdily built.
TX-BCT boom mounted mulcher for skid steer loader features:
- SWINGING HAMMER ROTOR, LOW POWER ABSORPTION
- ROTOR Ø 330 mm.
- ROTOR TUBE 125 X 10 mm.
- AXLE DIAMETER Ø 40 mm.
- METAL CHASSIS WITH HIGH ELASTIC LIMIT
- CAST IRON BEARING SHELLS
- SWINGING ROTOR BEARINGS
- V-BELT WITH KEVLAR FIBRE
- REAR ROLLER
- HAMMERS WITH LOW POWER ABSORPTION
- FRONT GUARD
- GEARED MOTOR GROUP II Pmax=250 bar.
- BY-PASS SYSTEM INCLUDED
- HOSES UP TO HAMMER INSTALLATION
TX-BCT boom mounted mulcher for skid steer loader models:
| Working width | Weight excavadora | Liters | Overall width | Weight Kg. | Hammers | Belts |
|---|---|---|---|---|---|---|
| 1400 | 1,5-3,5 Tn. | 40-80 | 1650 | 390 | 18 | 3 |
| 1600 | 1,5-3,5 Tn. | 40-80 | 1850 | 445 | 22 | 4 |
| 1800 | 1,5-3,5 Tn. | 40-80 | 2050 | 504 | 24 | 4 |
TX-BCT boom mounted mulcher for skid steer loader accesories:
Front chain set
Hydraulic movement
Plus geared hydraulic motor group III
Plus paddle hydraulic motor